To see the sensors you would need to do the following:

  1. enter "edit mode" in Traincontroller, and go to a switchboard
  2. add a contact indicator
  3. right click on the new contact indicator and select “properties”
  4. select the “connection” tab
  5. For “digital system” select “LocoNet – General Input (e.g. DS54, BDL16)
  6. for “address” select the sensor board number from the SIGM20 settings in LocoAnalyse
  7. for “input” select the sensor input number (1-8)

The contact indicator will now light up when the sensor is occupied.